Micromod MOD: 30ML Operation and Template Setup Instrukcja Użytkownika Pobierz pdf (Strona 82)

MOD 30ML Operation

APPENDIX A - EVENT CODES

A-20

Table A-2. Event Codes, Description and Action

Block

Type

Codes Full Message Text Description/Action

WDOM

4 BLOCK MODE SET TO AUTO Information only.

WDOM

5 BLOCK MODE SET TO MANUAL Information only.

WDOM

6 I/O MISMATCH A slot configured for a digital module contains

an intelligent module (analog input, analog

output, ICN, MSC or RIO).

NOTE: This diagnostic cannot distinguish

between an empty slot and a digital I/O module

or between different types of digital modules.

WDOM

7 WDO_MODULE_ERROR One of the following conditions was detected:

• The module readback value is not the same

as the previous result value.

• The select circuit, which is used to

communicate with the module blocks, has a

diagnostic error. In this case, all modules

report this diagnostic.

WRIM 4 BLOCK MODE SET TO AUTO Information only.

WRIM 5 BLOCK MODE SET TO MANUAL Information only.

WRIM 6 I/O MISMATCH A configured slot is either empty or the installed

module does not match the slot configuration.

WRIM 7 I/O COMMUNICATIONS ERROR One of the following conditions was detected:

• There is a checksum error in the

communications between this block and the

module.

• The select circuit, which is used to

communicate with the module, has a

diagnostic error. In this case, all modules

report a communications error.

WRIM 8 WRIM MODULE ERROR The module has reported an error which is

identified by an extended error code. The

error codes can be viewed via Attribute No.18,

Extended Error (EXTERR).

1 2 ... 77 78 79 80 81 82 83 84

Brak uwag

Micromod MOD: 30ML Operation and Template Setup Instrukcja Użytkownika Strona 82